Features July 2018 Issue

Make A Tie-down Strop

Need a tie-down loop of any size? Stitch one up yourself.

After hundreds of years of seafaring, there shouldn’t be any new rope tricks. Then new high-strength materials like Amsteel came along, suggesting new applications for old-school knot craft. The age-of-sail strop morphed into the versatile the soft shackle (see “Going Soft on Shackles,” April 2015). Racing sailors employ it to eliminate weight aloft, and cruisers like the economy and versatility. We’ve found good uses for soft shackles on jib sheets and ground tackle, but the strop is also alive and well, securing tarps and gear. The best part is you can make them from old rope, costing nothing.

Photos by Drew Frye

Made from recycled rope you already have, the adjustable strop can be used to secure gear or equipment on deck or below.

A strop is a short length of rope with a fixed loop used to connect to ropes, or join to itself. In this case we’re talking about a strop with a fixed loop at one end and a knot in the other, with the loop carefully sized so that the knot cannot slip through unless someone pushes it while the line is completely slack.

It is not required for the loop to noose closed under load, as it does in a soft shackle, because nylon and polyester, particularly in used line, have much greater friction. We’ve used simple knotted strops on genoa clews, although we switched to Dyneema soft shackles a few years ago because the greater strength made them smaller, prone to snags, and longer lasting.

There are also numerous low-load applications where custom-tied strops can simplify daily operations, reduce frustrations, and even add a little nautical flavor. Unlike metal alternatives, they can’t scratch decks or spars, corrode, or stain, and unlike knots, they never jam while under load or freeze up in the winter.

Certainly there are as many ways to tie these as there are riggers, and as many uses as there are boats. We will describe the two variations we have found useful.

Long Strop

We use long strops to secure tarps, and others have used modified versions tied in Amsteel on halyards (different knots are used with Amsteel because of its slipperiness). One end can be permanently secured, or both ends can be free.

1. Tie an Oysterman’s stopper knot (Ashley #526) in the end, leaving a 4-inch tail. The Oysterman’s stopper grips better than the common Figure 8 stopper knot (see adjacent photos).

2. Tie a bowline with a bight or some other secure loop 16-18 inches up the line. The loop should fit the end knot, even after tightening.

Adjustable Strop

We first saw these in use on a tall ship as part of the lashings securing a tender on the deck. This is tied with either hollow braid rope or by using only the cover of double-braid rope.

The accompanying photos show cover-only from retired 3/8-inch polyester double braid. New line is easier to splice, but where’s the charm or the economy in that?

1. Cut a length about three times the required length plus about 32 inches.

2. Tie an Oysterman’s stopper knot in a scrap line. The knot serves as a template, used only to judge the sizes of the loops you’ll make.

3. Double the rope to form a bight, this spot marks “buttonhole” end of your strop, formed by an eye splice.

4. Form a locked Brummel eye splice at the bight (See www.animatedknots.com/brummel/), but instead of burying the end, pull it through to accept the next splice .

5. Using the “standing” end in Step 4, form a second loop by creating a locked brummel splice about two inches from the first loop.

6. Continue alternately crossing and Brummel-splicing the lines until the desired number of loops are formed, or until you are within 16 inches of the shortest end.

7. Pass one of the covers (whichever is shorter) into the core of the other and bring it out the end.

Tie an Ashley stopper knot with the end, leaving a 4-inch tail.

Avid sailor and ice-climber, Drew Frye is a technical editor at Practical Sailor. He  blogs about cruising products at www.sail-delmarva.blogspot.com .

Comments (2)

the blog address at the end of the article is incorrect. It is "sail-delmarva" or just google drew frye blog

Posted by: Sam Steele | July 5, 2018 8:14 PM    Report this comment

What an awesome rope and stitching table! Are there any archived articles on the details for it?

Posted by: 99expy | July 1, 2018 10:25 AM    Report this comment

New to Practical Sailor?
Register for Free!

Already Registered?
Log In